Expression Pattern of the Alpha-Kafirin Promoter Coupled with a Signal Peptide from Sorghum bicolor L. Moench

Regulatory sequences with endosperm specificity are essential for foreign gene expression in the desired tissue for both grain quality improvement and molecular pharming. In this study, promoters of seed storage α-kafirin genes coupled with signal sequence (ss) were isolated from Sorghum bicolor L. Moench genomic DNA by PCR. The α-kafirin promoter (α-kaf) contains endosperm specificity-determining motifs, prolamin-box, the O2-box 1, CATC, and TATA boxes required for α-kafirin gene expression in sorghum seeds. The constructs pMB-Ubi-gfp and pMB-kaf-gfp were microprojectile bombarded into various sorghum and sweet corn explants. GFP expression was detected on all explants using the Ubi promoter but only in seeds for the α-kaf promoter. This shows that the α-kaf promoter isolated was functional and demonstrated seed-specific GFP expression. The constructs pMB-Ubi-ss-gfp and pMB-kaf-ss-gfp were also bombarded into the same explants. Detection of GFP expression showed that the signal peptide (SP)::GFP fusion can assemble and fold properly, preserving the fluorescent properties of GFP.

Development of a transformation system for sorghum (Sorghum bicolor L.)

Sorghum (Sorghum bicolor (L.) Moench) is the world’s fifth major cereal crop and holds importance as a construction material, food and fodder source. More recently, the potential of this plant as a biofuel source has been noted. Despite its agronomic importance, the use of sorghum production is being constrained by both biotic and abiotic factors. These challenges could be addressed by the use of genetic engineering strategies to complement conventional breeding techniques. However, sorghum is one of the most recalcitrant crops for genetic modification with the lack of an efficient tissue culture system being amongst the chief reasons. Therefore, the aim of this study was to develop an efficient tissue culture system for establishing regenerable embryogenic cell lines, micropropagation and acclimatisation for Sorghum bicolor and use this to optimise parameters for genetic transformation via Agrobacterium-mediated transformation and microprojectile bombardment. Using five different sorghum cultivars, SA281, 296B, SC49, Wray and Rio, numerous parameters were investigated in an attempt to establish an efficient and reproducible tissue culture and transformation system. Using immature embryos (IEs) as explants, regenerable embryogenic cell lines (ECLs) could only be established from cultivars SA281 and 296B. Large amounts of phenolics were produced from IEs of cultivars, SC49, Wary and Rio, and these compounds severely hindered callus formation and development. Cultivar SA281 also produced phenolics during regeneration. Attempts to suppress the production of these compounds in cultivars SA281 and SC49 using activated charcoal, PVP, ascorbic acid, citric acid and liquid filter paper bridge methods were either ineffective or had a detrimental effect on embryogenic callus formation, development and regeneration. Immature embryos sourced during summer were found to be far more responsive in vitro than those sourced during winter. In an attempt to overcome this problem, IEs were sourced from sorghum grown under summer conditions in either a temperature controlled glasshouse or a growth chamber. However, the performance of these explants was still inferior to that of natural summer-sourced explants. Leaf whorls, mature embryos, shoot tips and leaf primordia were found to be unsuitable as explants for establishing ECLs in sorghum cultivars SA281 and 296B. Using the florets of immature inflorescences (IFs) as explants, however, ECLs were established and regenerated for these cultivars, as well as for cultivar Tx430, using callus induction media, SCIM, and regeneration media, VWRM. The best in vitro responses, from the largest possible sized IFs, were obtained using plants at the FL-2 stage (where the last fully opened leaf was two leaves away from the flag leaf). Immature inflorescences could be stored at 25oC for up to three days without affecting their in vitro responses. Compared to IEs, the IFs were more robust in tissue culture and showed responses which were season and growth condition independent. A micropropagation protocol for sorghum was developed in this study. The optimum plant growth regulator (PGR) combination for the micropropagation of in vitro regenerated plantlets was found to be 1.0 mg/L BAP in combination with 0.5 mg/L NAA. With this protocol, cultivars 296B and SA281 produced an average of 57 and 13 off-shoots per plantlet, respectively. The plantlets were successfully acclimatised and developed into phenotypically normal plants that set seeds. A simplified acclimatisation protocol for in vitro regenerated plantlets was also developed. This protocol involved deflasking in vitro plantlets with at least 2 fully-opened healthy leaves and at least 3 roots longer than 1.5 cm, washing the media from the roots with running tap water, planting in 100 mm pots and placing in plastic trays covered with a clear plastic bag in a plant growth chamber. After seven days, the corners of the plastic cover were opened and the bags were completely removed after 10 days. All plantlets were successfully acclimatised regardless of whether 1:1 perlite:potting mix, potting mix, UC mix or vermiculite were used as potting substrates. Parameters were optimised for Agrobacterium-mediated transformation (AMT) of cultivars SA281, 296B and Tx430. The optimal conditions were the use of Agrobacterium strain LBA4404 at an inoculum density of 0.5 OD600nm, heat shock at 43oC for 3 min, use of the surfactant Pluronic F-68 (0.02% w/v) in the inoculation media with a pH of 5.2 and a 3 day co-cultivation period in dark at 22oC. Using these parameters, high frequencies of transient GFP expression was observed in IEs precultured on callus initiation media for 1-7 days as well as in four weeks old IE- and IF-derived callus. Cultivar SA281 appeared very sensitive to Agrobacterium since all tissue turned necrotic within two weeks post-exposure. For cultivar 296B, GFP expression was observed up to 20 days post co-cultivation but no stably transformed plants were regenerated. Using cultivar Tx430, GFP was expressed for up to 50 days post co-cultivation. Although no stably transformed plants of this cultivar were regenerated, this was most likely due to the use of unsuitable regeneration media. Parameters were optimised for transformation by particle bombardment (PB) of cultivars SA281, 296B and Tx430. The optimal conditions were use of 3-7 days old IEs and 4 weeks old IF callus, 4 hour pre- and post-bombardment osmoticum treatment, use of 0.6 µm gold microparticles, helium pressure of 1500 kPa and target distance of 15 cm. Using these parameters for PB, transient GFP expression was observed for up to 14, 30 and 50 days for cultivars SA281, 296B and Tx430, respectively. Further, the use of PB resulted in less tissue necrosis compared to AMT for the respective cultivars. Despite the presence of transient GFP expression, no stably transformed plants were regenerated. The establishment of regenerable ECLs and the optimization of AMT and PB parameters in this study provides a platform for future efforts to develop an efficient transformation protocol for sorghum. The development of GM sorghum will be an important step towards improving its agronomic properties as well as its exploitation for biofuel production.

Caustic potash pulping study of water efficient Arudno donax and Sorghum bicolor; a comparison to sugarcane bagasse

Numerous crops grow in sugar regions that have the potential to increase the amount of biomass available to a small bagasse-based pulp factory. Arundo donax and Sorghum offer unique advantages to farmers compared to other agricultural crops. Sorghum bicolour requires only 1/3 of the water of sugarcane. Arundo donax is a very high yield crop, it can also grow with little water but it has the further advantage in that it is also highly stress tolerant, making it suitable for land which is unsuited to other crops. Pulps produced from these crops were benchmarked against sugarcane bagasse pulp. Arundo, sorghum and bagasse were pulped using KOH and anthraquinone to 20 Kappa number so as to produce a bleachable pulp. The unbleached sorghum pulp has better tensile strength properties than the unbleached Arundo pulp (43.8 Nm/g compared to 21.4 Nm/g) and the bleached sorghum pulp tensile strength was similar to bagasse (28.4 Nm/g). At 20 Kappa number, sorghum pulp had acceptable yield for a non-wood fibre (45% c.f. 55% for bagasse), Arundo donax pulp had low tensile strength, and relatively low yield (38.7%), even for an agricultural fibre and required severe cooking conditions to achieve similar delignification to sugarcane bagasse or sorghum. Sorghum and Arundo donax produced thicker handsheets than bagasse (>160 μm c.f. 122 μm for bagasse). In preliminary experiments sorghum and bagasse responded slightly better to Totally Chlorine Free bleaching (QPP), although none achieved a satisfactory brightness level and more optimisation is needed.

Identification of QTL for sugar-related traits in a sweet x grain sorghum (Sorghum bicolor L. Moench) recombinant inbred population

QTL for stem sugar-related and other agronomic traits were identified in a converted sweet (R9188) × grain (R9403463-2-1) sorghum population. QTL analyses were conducted using phenotypic data for 11 traits measured in two field experiments and a genetic map comprising 228 SSR and AFLP markers grouped into 16 linkage groups, of which 11 could be assigned to the 10 sorghum chromosomes (SBI-01 to SBI-10). QTL were identified for all traits and were generally co-located to five locations (SBI-01, SBI-03, SBI-05, SBI-06 and SBI-10). QTL alleles from R9188 were detected for increased sucrose content and sugar content on SBI-01, SBI-05 and SBI-06. R9188 also contributed QTL alleles for increased Brix on SBI-05 and SBI-06, and increased sugar content on SBI-03. QTL alleles from R9403463-2-1 were found for increased sucrose content and sucrose yield on SBI-10, and increased glucose content on SBI-07. QTL alleles for increased height, later flowering and greater total dry matter yield were located on SBI-01 of R9403463-2-1, and SBI-06 of R9188. QTL alleles for increased grain yield from both R9403463-2-1 and R9188 were found on SBI-03. As an increase in stem sugars is an important objective in sweet sorghum breeding, the QTL identified in this study could be further investigated for use in marker-assisted selection of sweet sorghum.

An assessment of the genetic relationship between sweet and grain sorghums, within Sorghum bicolor ssp. bicolor (L.) Moench, using AFLP markers

Compared to grain sorghums, sweet sorghums typically have lower grain yield and thick, tall stalks which accumulate high levels of sugar (sucrose, fructose and glucose). Unlike commercial grain sorghum (S. bicolor ssp. bicolor) cultivars, which are usually F1 hybrids, commercial sweet sorghums were selected as wild accessions or have undergone limited plant breeding. Although all sweet sorghums are classified within S. bicolor ssp. bicolor, their genetic relationship with grain sorghums is yet to be investigated. Ninety-five genotypes, including 31 sweet sorghums and 64 grain sorghums, representing all five races within the subspecies bicolor, were screened with 277 polymorphic amplified fragment length polymorphism (AFLP) markers. Cluster analysis separated older sweet sorghum accessions (collected in mid 1800s) from those developed and released during the early to mid 1900s. These groups were emphasised in a principle component analysis of the results such that sweet sorghum lines were largely distinguished from the others, particularly by a group of markers located on sorghum chromosomes SBI-08 and SBI-10. Other studies have shown that QTL and ESTs for sugar-related traits, as well as for height and anthesis, map to SBI-10. Although the clusters obtained did not group clearly on the basis of racial classification, the sweet sorghum lines often cluster with grain sorghums of similar racial origin thus suggesting that sweet sorghum is of polyphyletic origin within S. bicolor ssp. bicolor.

DArT markers: Diversity analyses and mapping in Sorghum bicolor

The sequential nature of gel-based marker systems entails low throughput and high costs per assay. Commonly used marker systems such as SSR and SNP are also dependent on sequence information. These limitations result in high cost per data point and significantly limit the capacity of breeding programs to obtain sufficient return on investment to justify the routine use of marker-assisted breeding for many traits and particularly quantitative traits. Diversity Arrays Technology (DArT™) is a cost effective hybridisation-based marker technology that offers a high multiplexing level while being independent of sequence information. This technology offers sorghum breeding programs an alternative approach to whole-genome profiling. We report on the development, application, mapping and utility of DArT™ markers for sorghum germplasm. Results: A genotyping array was developed representing approximately 12,000 genomic clones using PstI+BanII complexity with a subset of clones obtained through the suppression subtractive hybridisation (SSH) method. The genotyping array was used to analyse a diverse set of sorghum genotypes and screening a Recombinant Inbred Lines (RIL) mapping population. Over 500 markers detected variation among 90 accessions used in a diversity analysis. Cluster analysis discriminated well between all 90 genotypes. To confirm that the sorghum DArT markers behave in a Mendelian manner, we constructed a genetic linkage map for a cross between R931945-2-2 and IS 8525 integrating DArT and other marker types. In total, 596 markers could be placed on the integrated linkage map, which spanned 1431.6 cM. The genetic linkage map had an average marker density of 1/2.39 cM, with an average DArT marker density of 1/3.9 cM. Conclusion: We have successfully developed DArT markers for Sorghum bicolor and have demonstrated that DArT provides high quality markers that can be used for diversity analyses and to construct medium-density genetic linkage maps. The high number of DArT markers generated in a single assay not only provides a precise estimate of genetic relationships among genotypes, but also their even distribution over the genome offers real advantages for a range of molecular breeding and genomics applications.

Genetic erosion and changes in distribution of sorghum (Sorghum bicolor L. (Moench)) landraces in north-eastern Ethiopia

Ethiopia is believed to be the centre of origin and domestication for sorghum, where sorghum remains one of the main staple crops. Loss of biodiversity is occurring at an alarming rate in Ethiopia and crops, including sorghum, have long been recognized as vulnerable to genetic erosion. A major collection of sorghum germplasm was made in 1973 by Gebrekidan and Ejeta from north-eastern Ethiopia. A new collection of landraces was made in 2003, and these were field evaluated at Sirinka in 2004 along with representative samples from the 1973 collection. Farmer surveys and soil and climate surveys were also performed. Preliminary analysis demonstrated that some important landraces have disappeared either locally or regionally in the past 30 years and many other landraces have become marginalized. Landraces which are less preferred in terms of agronomic value and end use, and introductions, have become increasingly important. Late maturing landraces were found to be particularly vulnerable, with a number disappearing altogether. Farmers have become more risk averse, and factors such as declining soil fertility, more frequent drought and unreliable rainfall, and increased pest infestation have contributed to a change in farmer landrace selection. Data are presented on the variability and unique characters of some of the Ethiopian landraces, and implications for conservation are discussed.

Location of major effect genes in sorghum (Sorghum bicolor (L.) Moench).

Major effect genes are often used for germplasm identification, for diversity analyses and as selection targets in breeding. To date, only a few morphological characters have been mapped as major effect genes across a range of genetic linkage maps based on different types of molecular markers in sorghum (Sorghum bicolor (L.) Moench). This study aims to integrate all available previously mapped major effect genes onto a complete genome map, linked to the whole genome sequence, allowing sorghum breeders and researchers to link this information to QTL studies and to be aware of the consequences of selection for major genes. This provides new opportunities for breeders to take advantage of readily scorable morphological traits and to develop more effective breeding strategies. We also provide examples of the impact of selection for major effect genes on quantitative traits in sorghum. The concepts described in this paper have particular application to breeding programmes in developing countries where molecular markers are expensive or impossible to access.

QTL for nodal root angle in sorghum (Sorghum bicolor L. Moench) co-locate with QTL for traits associated with drought adaptation.

Nodal root angle in sorghum influences vertical and horizontal root distribution in the soil profile and is thus relevant to drought adaptation. In this study, we report for the first time on the mapping of four QTL for nodal root angle (qRA) in sorghum, in addition to three QTL for root dry weight, two for shoot dry weight, and three for plant leaf area. Phenotyping was done at the six leaf stage for a mapping population (n = 141) developed by crossing two inbred sorghum lines with contrasting root angle. Nodal root angle QTL explained 58.2% of the phenotypic variance and were validated across a range of diverse inbred lines. Three of the four nodal root angle QTL showed homology to previously identified root angle QTL in rice and maize, whereas all four QTL co-located with previously identified QTL for stay-green in sorghum. A putative association between nodal root angle QTL and grain yield was identified through single marker analysis on field testing data from a subset of the mapping population grown in hybrid combination with three different tester lines. Furthermore, a putative association between nodal root angle QTL and stay-green was identified using data sets from selected sorghum nested association mapping populations segregating for root angle. The identification of nodal root angle QTL presents new opportunities for improving drought adaptation mechanisms via molecular breeding to manipulate a trait for which selection has previously been very difficult.

Estimating Hydrogen Cyanide in Forage Sorghum (Sorghum bicolor) by Near-Infrared Spectroscopy

Hydrogen cyanide (HCN) is a toxic chemical that can potentially cause mild to severe reactions in animals when grazing forage sorghum. Developing technologies to monitor the level of HCN in the growing crop would benefit graziers, so that they can move cattle into paddocks with acceptable levels of HCN. In this study, we developed near-infrared spectroscopy (MRS) calibrations to estimate HCN in forage sorghum and hay. The full spectral NIRS range (400-2498 nm) was used as well as specific spectral ranges within the full spectral range, i.e., visible (400-750 nm), shortwave (800-1100 nm) and near-infrared (NIR) (1100-2498 nm). Using the full spectrum approach and partial least-squares (PLS), the calibration produced a coefficient of determination (R-2) = 0.838 and standard error of cross-validation (SECV) = 0.040%, while the validation set had a R-2 = 0.824 with a low standard error of prediction (SEP = 0.047%). When using a multiple linear regression (MLR) approach, the best model (NIR spectra) produced a R-2 = 0.847 and standard error of calibration (SEC) = 0.050% and a R-2 = 0.829 and SEP = 0.057% for the validation set. The MLR models built from these spectral regions all used nine wavelengths. Two specific wavelengths 2034 and 2458 nm were of interest, with the former associated with C=O carbonyl stretch and the latter associated with C-N-C stretching. The most accurate PLS and MLR models produced a ratio of standard error of prediction to standard deviation of 3.4 and 3.0, respectively, suggesting that the calibrations could be used for screening breeding material. The results indicated that it should be feasible to develop calibrations using PLS or MLR models for a number of users, including breeding programs to screen for genotypes with low HCN, as well as graziers to monitor crop status to help with grazing efficiency.

Non-cellulosic cell wall polysaccharides are subject to genotype × environment effects in sorghum (Sorghum bicolor) grain

Sorghum is a staple food for half a billion people and, through growth on marginal land with minimal inputs, is an important source of feed, forage and increasingly, biofuel feedstock. Here we present information about non-cellulosic cell wall polysaccharides in a diverse set of cultivated and wild Sorghum bicolor grains. Sorghum grain contains predominantly starch (64–76) but is relatively deficient in other polysaccharides present in wheat, oats and barley. Despite overall low quantities, sorghum germplasm exhibited a remarkable range in polysaccharide amount and structure. Total (1,3;1,4)-β-glucan ranged from 0.06 to 0.43 (w/w) whilst internal cellotriose:cellotetraose ratios ranged from 1.8 to 2.9:1. Arabinoxylan amounts fell between 1.5 and 3.6 (w/w) and the arabinose:xylose ratio, denoting arabinoxylan structure, ranged from 0.95 to 1.35. The distribution of these and other cell wall polysaccharides varied across grain tissues as assessed by electron microscopy. When ten genotypes were tested across five environmental sites, genotype (G) was the dominant source of variation for both (1,3;1,4)-β-glucan and arabinoxylan content (69–74), with environment (E) responsible for 5–14. There was a small G × E effect for both polysaccharides. This study defines the amount and spatial distribution of polysaccharides and reveals a significant genetic influence on cell wall composition in sorghum grain.

Fine Mapping of qDor7, a Major QTL Affecting Seed Dormancy in Sorghum (Sorghum bicolor (L.) Moench)

Seed dormancy is a key domestication trait for major crops, which is acquired in long-term systems development processes and enables the survival of plants in adverse natural conditions. It is a complex trait under polygenic control and is affected by endogenous and environmental factors. In the present study, a major seed dormancy QTL in sorghum (Sorghum bicolor (L.) Moench), qDor7, detected previously, was fine mapped using a large, multi-generational population. The qDor7 locus was delimited to a 96-kb region which contains 16 predicted gene models. These results lay a solid foundation for cloning qDor7. In addition, the functional markers tightly linked to the seed dormancy QTL may be used in marker-assisted selection for seed dormancy in sorghum.

Producción y calidad de la biomasa de Zea mays, Sorghum bicolor, Oriza sativa en alfombra forrajera hidropónica.

Con el objetivo de evaluar los tratamientos Zea mays, Sorghum bicolor y Oriza sativa, para determinar su rendimiento y composición química, como alfombra forrajera hidropónico, se realizó un ensayo en el Invernadero del Departamento de Protección Vegetal y Forestal (DEPAF) - Universidad Nacional Agraria, Managua, ubicada en el km 12 ½ carretera norte. Como sustrato para la alfombra se utilizó heno del pasto Cubano CT - 115 (Pennisetum purpureum x P. tiphoydes). Se utilizó un Diseño Completo al Azar, con tres tratamientos y, tres repeticiones. Como unidad experimental se utilizó la cantidad de 1000 gr (1 kg) distribuida uniformemente en bandejas plástica de 0.2034 m2. Las variables de estudio fueron; rendimiento de alfombra en verde y seca, por bandeja y por metro cuadrado; porcentajes de; materia seca, proteína cruda, fibra cruda y cenizas. Se realizaron Análisis de Varianza y, separaciones de medias, usando Duncan (P<0.05). Para el análisis estadístico las variables codificadas en porcentajes se transformaron, según, 2 arco seno p (Dos veces Arco seno de la raíz cuadrada de la proporción). No hubo diferencias significativas (P>0,05) para el rendimiento por bandeja de alfombra en verde entre tratamientos, pero sí para el rendimiento (kg) por bandeja de materia seca (P<0.05) entre la producción del arroz (0.91) y sorgo (0.65), no así entre el arroz y maíz, ni entre el maíz y el sorgo. Resultados similares se encontraron para la producción por m2. No se encontraron diferencias significativas (P>0.05) entre los tres cultivos, oscilando la producción desde 23.59 a 28.35 kg/m2, para sorgo y maíz respectivamente. Se encontraron diferencias significativas (P<0.05) entre tratamientos para la producción de biomasa seca, la mayor producción la obtuvo el arroz y la menor el sorgo (4.48 y 3.22 kg/m2). La gramínea con el porcentaje de MS más alto fue el arroz (16.48), que mostró diferencias significativas (P<0,05) con respecto al sorgo y el maíz; el maíz presentó los porcentajes de MS más bajos (12.41). Respecto a la proteína cruda se encontraron diferencias significativas (P<0.05) entre los cultivos. El mayor contenido (%) se obtuvo en el sorgo (15.01) y el menor (9.76) en el arroz. Los contenidos de fibra cruda presentaron diferencias significativas (P< 0.05) entre el arroz con el maíz y sorgo, no así entre sorgo y maíz. El arroz presentó mayores contenidos (34.59 %), registrándose el menor tenor en el sorgo (19.71 %). Los contenidos de cenizas presentaron las mismas tendencias que la fibra cruda en cuanto a las diferencias estadísticas encontradas. El mayor contenido (%) de cenizas se obtuvo en el arroz (9.31) y el menor para el maíz (4.51). La alfombra forrajera hidropónica es una alternativa viable para la producción de forraje de alta calidad e inocuidad.

Efecto de sistemas de labranza, rotación y control de malezas sobre la cenosis de las malezas y el crecimiento, desarrollo y rendimiento de los cultivos de maíz (Zea mays L.) y sorgo (Sorghum bicolor (L) moench)

En este trabajo se estudió el efecto de diferentes sistemas de labranza, métodos de control de malezas y rotaciones de cultivos, sobre la dinámica de la cenósis de las malezas, el crecimiento, desarrollo y rendimiento de los cultivos maíz y sorgo. El ensayo se inició en primera de 1992 en los meses de Mayo a Agosto de 1992, en el Centro Experimental "La Compañía", ubicada en el municipio de Masatepe, Carazo. El ensayo se estableció en un arreglo trifactorial en franjas con 4 repeticiones. Siendo el factor A: Labranza convencional, Labranza mínima, Labranza cero. Factor 8: Rotación maíz-frijol, rotación sorgo-soya, y el factor C: Control químico, control período crítico, control limpia periódica. Los resultados demuestran que el sistema de labranza convencional y el control químico fueron de mejor comportamiento respecto a la abundancia de las malezas para la rotación maíz-frijol, mientras que para la rotación sorgo-soya labranza cero y el control limpia periódica. Presentando menor abundancia esta rotación. Respecto a la cobertura, labranza convencional obtuvo el menor porcentaje para ambas rotaciones, igual que para la diversidad, mientras que labranza cero se destaca en ambas rotaciones para la biomasa con el menor valor. El control limpia periódica fue el de mejores resultados respecto a cobertura, biomasa y diversidad para la rotación sorgo-soya, seguido del control químico se destacan las especies Sorghum halepense y Melanthera aspera. Labranza convencional y el control químico fueron los de mejor comportamiento en el cultivo del maíz lo cual se refleja en el rendimiento. El rendimiento de materia seca se vio favorecido por cero labranza al igual que altura de plantas y número de hojas. El cultivo del sorgo obtuvo los mejores resultados bajo el sistema de labranza cero y el control período crítico.

Influencia de rotación de cultivos y métodos de control sobre la dinámica de las malezas y el crecimiento, desarrollo y rendimiento de los cultivos maíz (Zea mays L.), sorgo (Sorghum bicolor L.) y pepino (Cucumis sativus L.)

En el presente estudio se analizó la influencia que tienen los cultivos antecesores y diferentes métodos de control sobre lo cenosis de malezas y su influencia en el crecimiento, desarrollo y rendimiento en los cultivos de sorgo, maíz y pepino. Dicho trabajo se estableció en la época de primera (1990) en la hacienda “Las mercedes”, en un diseño de parcelas divididas en bloques completos el azar con cuatro repeticiones. Las rotaciones en estudio fueron sorgo – sorgo, sorgo - maíz, soya -maíz, soya - pepino y sorgo - pepino; los métodos de control químico, control por período crítico y limpia periódica. La especie Rottboellia cochichinesis, se presentó como maleza de mayor abundancia en todas las rotaciones a excepción de la rotación soya - repino, que la mayor abundancia la reflejó Cyperus rotundus al momento de la cosecha. Los diferentes controles mostraron un comportamiento similar para los cultivos sorgo y maíz en el número de Individuos para R. Cochichinesis. La rotación soya – pepino presentó) la mayor cobertura a la cosecha y el control químico, atribuyéndose a que no hubo una competencia interespecífica con el cultivo. R. Cochichinesis, se encontró con mayor biomasa, en todas las rotaciones. El cultivo de pepino acumuló la mayor biomasa en el químico para la especie R. Cochininesis, demostrándose un cambio en la asociación de especies donde las poáceas reflejaron la mayor biomasa. La menor diversidad total a la cosecha se presentó en la rotación sorgo – sorgo y la mayor en soya –maíz. En sorgo, los controles período crítico y limpia periódica demostraron la menor diversidad a la cosecha. En maíz la menor diversidad se obtuvo en el control por limpia periódica, ese mismo efecto se observó para el control químico en el cultivo de pepino a la cosecha. En el cultivo del sorgo no reflejó diferencias estadísticas significativas para las variables del crecimiento, desarrollo y rendimiento, al igual en el cultivo de maíz excepto en los diferentes controles, para la variable peso de la mazorca. En el cultivo de pepino existe significancia estadística para la variable longitud de guía, con respecto a los controles a los 54 dds, y en las rotaciones soya –pepino, sorgo – pepino para el diámetro, longitud del fruto y número de frutos.